Sapphire Plug-ins for After Effects: ConvolveComp

S_ConvolveComp

Convolves front and back images with a kernel, and composites them using a matte. Convolution is a mathematical operator which uses one image, the kernel, as a filter shape for another image (the source). Convolution effectively stamps a copy of the kernel at each point of the source, using the source's brightness at that point. The effect is that a copy of the kernel will appear over all the bright spots of the source. A kernel image shaped like a circle or polygon will give an effect similar to RackDefocusComp; a kernel image shaped like a starburst can give something like GlareComp.

The kernel size can vary between front and back so either or both can be blurred.

In the Sapphire Blur+Sharpen effects submenu.


Inputs:

Foreground: The current layer. The clip to use as foreground.

Background: Defaults to None. The clip to use as background.

Matte: Defaults to None. The alpha channel of this input specifies the opacities of the Foreground input. If this input is not provided, the alpha channel of the Foreground input is used instead. This input can be affected by the Invert Matte or Matte Use parameters.

Kernel: Defaults to None. The filter kernel or shape for the convolution. This should normally be all black around the edges (outside the specified Kernel Crop region), with a non-black central part. A larger shape normally produces blurrier results. Only the part of the kernel within the two Kernel Crop params is considered; the part outside that boundary is ignored.

Parameters:

Load Preset: Push-button .
Brings up the Preset Browser to browse all available presets for this effect.

Save Preset: Push-button .
Brings up the Preset Save dialog to save a preset for this effect.

Mocha Project: Default: 0, Range: 0 or greater.
Brings up the Mocha window for tracking footage and generating masks.

Blur Mocha: Default: 0, Range: 0 or greater.
Blurs the Mocha Mask by this amount before using. This can be used to soften the edges or quantization artifacts of the mask, and smooth out the time displacements.

Mocha Opacity: Default: 1, Range: 0 to 1.
Controls the strength of the Mocha mask. Lower values reduce the intensity of the effect.

Invert Mocha: Check-box,  Default: off.
If enabled, the black and white of the Mocha Mask are inverted before applying the effect.

Resize Mocha: Default: 1, Range: 0 to 2.
Scales the Mocha Mask. 1.0 is the original size.

Resize Rel X: Default: 1, Range: 0 to 2.
The relative horizontal size of the Mocha Mask.

Resize Rel Y: Default: 1, Range: 0 to 2.
The relative vertical size of the Mocha Mask.

Shift Mocha: X & Y,   Default: [0 0], Range: any.
Offsets the position of the Mocha Mask.

Bypass Mocha: Check-box,  Default: off.
Ignore the Mocha Mask and apply the effect to the entire source clip.

Show Mocha Only: Check-box,  Default: off.
Bypass the effect and show the Mocha Mask itself.

Combine Masks: Popup menu,  Default: Union .
Determines how to combine the Mocha Mask and Input Mask when both are supplied to the effect.
Union: Uses the area covered by both masks together.
Intersect: Uses the area that overlaps between the two masks.
Mocha Only: Ignore the Input Mask and only use the Mocha Mask.

Size Front: Default: 1, Range: 0 or greater.
Size Front resizes the kernel larger or smaller when convolving the Front clip. 1.0 is the original size. This parameter can be adjusted using the Size Front Widget.

Size Back: Default: 0, Range: 0 or greater.
Size Back resizes the kernel larger or smaller when convolving the Back clip. This parameter can be adjusted using the Size Back Widget.

Size Rel X: Default: 1, Range: 0 or greater.
Increase to make the kernel fatter or wider without changing its height. Decrease to shrink it horizontally, making it thinner.

Size Rel Y: Default: 1, Range: 0 or greater.
Increase to make the kernel taller without changing its wieght. Decrease to shrink it vertically, making it flatter.

Kernel Center: X & Y,   Default: [0 0], Range: any.
The center point of the kernel; if you think of convolution as repeated stamping of the kernel at each point of the source, the center is where the stamp aligns with the source pixels it's stamped over. If you move the center to the right in the kernel, the whole result image will move to the left, and similarly up and down. This parameter is ignored if AutoCenter is on. It may be helpful to turn on Show Kernel while adjusting this parameter. Note that if Autocenter is off, the center point is always included in the kernel no matter what this param is set to. This parameter can be adjusted using the Kernel Center Widget.

Autocenter: Check-box,  Default: on.
Automatically finds the center of the kernel image. Turning this on makes the effect ignore the Kernel Center parameter.

Use Color Kernel: Check-box,  Default: off.
Use each color channel of the kernel independently. Turn this on if your kernel is not just black and white and you want the colors of the kernel to be used in the convolution. Turn off for fastest rendering.

Show Kernel: Check-box,  Default: off.
Show the kernel over the result, for easier adjustment of kernel parameters. Turn this off for final rendering.

Use Gamma: Default: 1, Range: 0.1 or greater.
Values above 1 cause highlights in the source clip to keep their brightness after the convolution filter is applied.

Matte Gamma: Default: 1, Range: 0.1 or greater.
The gamma value to use for the defocus of the Matte.

Boost Highlights: Default: 0, Range: 0 or greater.
The amount to increase the luma of the highlights in the source clip. Increase this parameter to blow out the highlights without affecting the darks or mid-tones.

Hilight Threshold: Default: 0.9, Range: 0 or greater.
The minimum luma value for highlights. Pixels brighter than this will be brightened according to the Boost Highlights parameter.

Comp Premult: Check-box,  Default: on.
Disable this if you have provided a separate Matte input and the Foreground pixel values have not been pre-multiplied by this Matte.

Front Brightness: Default: 1, Range: 0 or greater.
Scale the brightness of the convolved Front clip.

Front Opacity: Default: 1, Range: 0 to 1.
Scale the opacity of the front clip before compositing over the back.

Front Threshold: Default: 0, Range: 0 or greater.
In the Front clip, any source value below this will be treated as black. When combining the convolved result with the original, you can increase this value to only convolve bright areas of the source. Typically when using this parameter, you will also set Combine to Screen or Add to get a glare-like effect.

Threshold Add Color: Default rgb: [0 0 0].
This can be used to raise the threshold on a specific color and thereby reduce the convolved result generated on areas of the source clip containing that color.

Back Brightness: Default: 1, Range: 0 or greater.
Scale the brightness of the convolved Back clip.

Combine: Popup menu,  Default: Convolve Only .
Determines how the front, back, and convolved images are combined.
Convolve Only: Convolve the Front and Back and composite them together. Use this option for a blur or defocus-like effect
Screen: Composite the Front over the convolved back, then screen with the convolved front. Use this option for a glow or glare-like effect.
Add: Composite the Front over the convolved back, then add the convolved front.
Difference: Composite the Front over the convolved back, then show the difference with the convolved front.

Edge Mode: X & Y,  Popup menu,  Default: [ Transparent Transparent ].
Determines the behavior when accessing areas outside the source image.
Transparent: Areas outside the source image are treated as transparent, which can produce transparency around the edges of the image. Select this for fastest rendering.
Repeat: Repeats the last pixel outside the border of the image.
Reflect: Reflects the image outside the border.

Kernel Threshold: Default: 0.001, Range: 0 or greater.
Any kernel value below this will be treated as black. It's important for the edges of the kernel image to be completely black, or the result will have a grayish cast to it. If your kernel image may have a little noise in the black areas, turn up threshold a little to remove that background noise.

Clamp Below Thresh: Check-box,  Default: on.
When turned on, values below the threshold are clamped to zero. This usually gives the best result. For certain special cases with partially-negative kernels, turning this off gives you additional flexibility in designing your kernel.

Kernel Crop1: X & Y,   Default: [-0.997 -0.747], Range: any.
The upper left corner of the kernel area. Parts of the kernel image outside the rectangle defined by Kernel Crop1 and Kernel Crop2 are assumed to be black. Making this area smaller to avoid processing the kernel's black edges can speed up the convolution somewhat. It may be helpful to turn on Show Kernel while adjusting this parameter. Note that if Autocenter is off, the center point is always included in the kernel no matter what this param is set to.

Kernel Crop2: X & Y,   Default: [0.997 0.747], Range: any.
The lower right corner of the kernel area.

Autoscale Mode: Popup menu,  Default: Max Channel .
In convolution, either a larger or brighter kernel will make the result image brighter. The kernel must be auto-scaled or normalized so the result is, on average, as bright as the input. The autoscaling can be done in several ways, each of which is best in certain circumstances. With a monochrome kernel or with Color Kernel turned off, Max Channel, Luma, and Indep Channels all give the same result.
Max Channel: Autoscales the kernel by summing the elements of each channel, and using whichever is brightest as the overall kernel scale factor. This normalizes a dim kernel to full brightness, and generally preserves the color of the kernel, but allows brightness variations in the dimmer channels to show in the result.
Luma: Autoscales the kernel by summing the luminances of each kernel pixel. This method preserves changes in the kernel's hue, but normalizes the luma, so a brighter or darker kernel will have no effect. Use the Scale parameter to adjust the result brightness.
Indep Channels: Independently normalizes each color channel of the kernel. A colored kernel will give a white/gray result with this method. Use this method if your kernel channels are independent of each other (i.e. different things going on in each of R, G, and B) but you want normalized results in each channel.
Count Nonzero: Count how many kernel pixels are nonzero (brighter than black), but otherwise ignore how bright they are. This method is best if you want variations in kernel hue and luma to show up in the result. But blurring the kernel will give a dimmer result, since there will be more nonzero pixels.
Kernel Size: Ignore the pixel values entirely; only use the size of the kernel rectangle to auto-scale. Use this if you want all kernel variations to show up in the result, but don't use it if you intend to animate Kernel Crop1 and Crop2, as that would affect the result's brightness.

Matte Use: Popup menu,  Default: Alpha .
Determines how the Matte input channels are used to make a monochrome matte.
Luma: the luminance of the RGB channels is used.
Alpha: only the Alpha channel is used.

Invert Matte: Check-box,  Default: off.
If on, inverts the Matte input so the effect is applied to areas where the Matte is black instead of white. This has no effect unless the Matte input is provided.

Soft Borders: Check-box,  Default: off.
If enabled, transparent borders are added to the input image before processing. This allows the result to include soft edges beyond the original image size. When off, the effect only occurs within the frame and the result will retain an edge at the borders.

Opacity: Popup menu,  Default: Normal .
Determines the method used for dealing with opacity/transparency.
All Opaque: Use this option to render slightly faster when the input image is fully opaque with no transparency (alpha=1).
Normal: Process opacity normally.
As Premult: Process as if the image is already in premultiplied form (colors have been scaled by opacity). This option also renders slightly faster than Normal mode, but the results will also be in premultiplied form, which is sometimes less correct.

Show Size Front: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Size Front parameter.This parameter only appears on AE and Premiere, where on-screen widgets are supported.

Show Size Back: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Size Back parameter.This parameter only appears on AE and Premiere, where on-screen widgets are supported.

Show Kernel Center: Check-box, Default: on.
Turns on or off the screen user interface for adjusting the Kernel Center parameter.This parameter only appears on AE and Premiere, where on-screen widgets are supported.

Show Kernel Crop: Check-box, Default: off.
Turns on or off the screen user interface for adjusting the Kernel Crop1 parameter.This parameter only appears on AE and Premiere, where on-screen widgets are supported.


See Also:

RackDefocus
DefocusPrism
RackDfComp
Blur
BlurChannels
BlurChroma
ZDefocus
Convolve
Sapphire Plug-ins Introduction

List all effects with pictures

List all effects by name

List all effects with a brief summary

General User Info
What's New In This Version
Compatibility Notes
Loading a Plug-in
Color Management with OpenColorIO
Loading and Saving Presets
Designing Lens Flares and Glares
Using the Sapphire Effect Builder
Using Mocha in Sapphire
Resetting Parameters to Defaults
Online Documentation
About GPU Acceleration
About Motion Blur
About Matte Inputs
About Alpha Processing
About Angle Parameters
About Pixel Aspect Ratios
Customizing Plug-ins
Known Problems
3rd Party Licenses

Glow Effects
Glow
GlowAura
GlowDarks
GlowDist
GlowEdges
GlowNoise
GlowOrthicon
GlowRainbow
GlowRings
UltraGlow
ZGlow
Light Beams
Rays
EdgeRays
Streaks

LensFlares
LensFlare
LensFlareAutoTrack
LightLeak
Glints & Glares
Glint
GlintRainbow
Glare

Other Lighting
BokehLights
DropShadow
Flashbulbs
Light3D
SpotLight

AutoPaint & HalfTone
AutoPaint
Sketch
Etching
Brush:Oil
Brush:Chalk
Crosshatch
Cartoon
CartoonPaint
Posterize
HalfTone
HalfToneColor
HalfToneRings

Kaleidoscopes
Kaleido:Triangles
Kaleido:Squares
Kaleido:Diamonds
Kaleido:Oct
KaleidoPolar
KaleidoRadial
FlysEyeCircles
FlysEyeHex
FlysEyeRect
TileScramble
Film Effects & Grain
FilmEffect
FilmDamage
Vignette
BleachBypass
Grain
GrainStatic
UltraGrain
Diffuse
VintageColor2Strip
VintageColor3Strip

Edge Effects
EdgeDetect
EdgeDetectDouble
EdgesInDirection
EdgeColorize

Embossing
Emboss
EmbossShiny
EmbossDistort
EmbossGlass
Other Stylize
BandPass
ColorFuse
DogVision
DigitalDamage
JpegDamage
TVDamage
Grunge
Mosaic
PixelSort
PseudoColor
PsykoBlobs
PsykoStripes
PrismLens
RomanTile
ScanLines
ScanLinesMono
Solarize
StripSlide
Zebrafy
ZebrafyColor
ZFogExponential
ZFogLinear

Adjust
ChannelSwitcher
ClampChroma
DuoTone
Gamma
Hotspots
HueSatBright
Invert
Monochrome
OCIOTransform
QuadTone
Threshold
Tint
TriTone
ShowBadColors

Composite
EdgeFlash
Layer
MathOps
MatteOps
MatteOpsComp
ZComp
Blur+Sharpen
Beauty
Blur
BlurChannels
BlurChroma
BlurDirectional
BlurMoCurves
BlurMotion
DefocusPrism
Convolve
ConvolveComp
Deband
EdgeBlur
EdgeAwareBlur
FreeLens
GrainRemove
Median
RackDefocus
RackDfComp
Sharpen
SoftFocus
ZConvolve
ZDefocus
ZBlur

Distort Effects
Distort
DistortBlur
DistortChroma
DistortRGB
Warps & Shake
InfiniteZoom
ParallaxStrips
WarpBubble
WarpBubble2
WarpChroma
WarpCornerPin
WarpDrops
WarpFishEye
WarpMagnify
WarpPerspective
WarpPolar
WarpPuddle
WarpPuff
WarpRepeat
WarpTransform
WarpVortex
WarpWaves
WarpWaves2
Shake
StretchFrameEdges

Lightning Zaps
UltraZap
Zap
ZapTo
ZapFrom

Gradients, Grid & Shape
Gradient
GradientMulti
GradientRadial
Grid
Shape

Procedural Textures
Caustics
Sparkles
SparklesColor
TextureCells
TextureChromaSpiral
TextureFlux
TextureFolded
TextureLoops
TextureMicro
TextureMoire
TextureNeurons
TextureNoiseEmboss
TextureNoisePaint
TexturePlasma
TextureSpots
TextureTiles
TextureWeave

Fractal Clouds
Clouds
CloudsColorSmooth
CloudsMultColor
CloudsPerspective
CloudsPsyko
CloudsVortex
Other Render
Aurora
LaserBeam
Luna
MuzzleFlash
NightSky
Time Effects
CutToDissolve
Feedback
FeedbackBubble
FeedbackDistort
FieldRemove
FreezeFrame
GetFrame
JitterFrames
MotionDetect
NearestColor
RandomEdits
RepairFrames
Retime
ReverseClip
ReverseEdits
TimeAverage
TimeDisplace
TimeSlice
TimeWarpRGB
Trails
TrailsDiffuse

Flicker Tools
Flicker
FlickerMatch
FlickerMatchColor
FlickerMatchMatte
FlickerMchMatteColor
FlickerRemove
FlickerRemoveColor
FlickerRemoveMatte
FlickerRmMatteColor

Effect Builder
Effect
Transition
Dissolve Transitions
Dissolve
DissolveAutoPaint
DissolveBlur
DissolveBubble
DissolveDefocus
DissolveDiffuse
DissolveDigitalDamage
DissolveDistort
DissolveEdgeRays
DissolveFilm
DissolveFlashbulbs
DissolveGlare
DissolveGlint
DissolveGlintRainbow
DissolveGlow
DissolveLensFlare
DissolveLuma
DissolvePixelSort
DissolvePuddle
DissolveRays
DissolveShake
DissolveSpeckle
DissolveStatic
DissolveTiles
DissolveUltraGlow
DissolveVortex
DissolveWaves
DissolveZap

Wipe Transitions
WipeBlobs
WipeBubble
WipeCells
WipeChecker
WipeCircle
WipeClock
WipeClouds
WipeDiffuse
WipeDots
WipeDoubleWedge
WipeFlux
WipeFourWedges
WipeLine
WipePixelate
WipeRectangle
WipeRings
WipeStar
WipeStripes
WipeTiles
WipeWedge
WipePlasma
WipePointalize
WipeWeave
WipeMoire
SwishPan
Swish3D

Other Transitions
CardFlip
FilmRoll
FlutterCut
HyperPull
HyperPush
ParallaxStripsTransition
StripSlideTransition
SwishPan
Swish3D
TVChannelChange WhipLash